Mold Release Sprays from Slide Products

Item #: SL54912
Heavy-Duty Mold Release and Pin Lube - Aerosol An ideal lubricant for the front half of ejector pins (pins in forward position), this almost dry lubricant minimizes the possibility of leaching out onto molded parts. Use in combination with application of Super Grease on back side of ejector pins. Stable at temperatures up to 450°F. Heavy-Duty Mold Release and Pin Lube can be used on plastics, rubber, waxes, glass-filled nylon and similar materials. • No chlorinated solvents • Non-silicone • Paintable • Food-approved lubricant(*****) • Dry release minimizes leaching out onto parts • Maximum Operating Temperature: 450°F (****) FDA regulation 21 CFR section 182.20; 21 CFR section 182.60; 21 CFR section 172.515

Item #: SL40112N
Silicone Mold Release Agent Get more cycles per spray, more cycles per can, with Slide’s Silicone high-quality, pure silicone-oil mold release. Keeps the most challenging parts from hanging up and stalling production. Extremely effective for injection and compression molding. (++) Lubricants are suitable for food contact use as indicated in Title 21 of the Code of Federal Regulations. The appropriate sections for release agents are 175.300, 177.2600, 178.3570 and 181.28. Federal Definitions and Standards of identity for Food CFR 121.101 (G.R.A.S.). • No chlorinated solvents • Food-approved lubricant(++) • Faster molding & more production • Approved for food packaging machinery • Recognized by UL • Maximum operating temperature: 600ºF

Item #: SL42612H
Universal mold release agent - Aerosol Universal is just that, a broad universal release that can be used on all thermoplastics, even more sensitive plastics. Approved as a direct food additive (+++++), Universal also meets certain requirements for molding medical products - contact us for details. Universal will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating. • No chlorinated solvents • Non-silicone paintable • Food-approved lubricant(+++++) • Use where parts must be painted, hot-stamped or metalized • Colorless • Maximum operating temperature: 600ºF (+++++) Meets or exceeds FDA and USP/NF requirements for 21 CFR 172.878, 21 CFR 178.3620 and 21 CFR 573.680

Item #: SL41412N
POLYCARBONATE RELEASE AEROSOL

Item #: SL42112N
SILICONE SPRAY LUBE AEROSOL