SL54912, HEAVY DUTY 10% MOLD RELEASE AEROSOL
Item #: SL54912
Product Info
Manufacturer:
SLIDE PRODUCTS INC
Heavy-Duty Mold Release and Pin Lube - Aerosol
An ideal lubricant for the front half of ejector pins (pins in forward position), this almost dry lubricant minimizes the possibility of leaching out onto molded parts. Use in combination with application of Super Grease on back side of ejector pins. Stable at temperatures up to 450°F. Heavy-Duty Mold Release and Pin Lube can be used on plastics, rubber, waxes, glass-filled nylon and similar materials.
• No chlorinated solvents
• Non-silicone
• Paintable
• Food-approved lubricant(*****)
• Dry release minimizes leaching out onto parts
• Maximum Operating Temperature: 450°F
(****) FDA regulation 21 CFR section 182.20; 21 CFR section 182.60; 21 CFR section 172.515
Item Specifications
-
Aerosol - Box of 12
-
Heavy-Duty Releases
-
13.00 lbs per DOZ