CGW34234, 14X1-1/2X5 TY5 AS346H CERAMIC

Item Specifications

• Grain
  Ceramic
• Grit
  46
• Diameter
  14
• Thickness
  1-1/2"
• Arbor Hole
  5
• Type
  TY5
• Misc
  AS3 – Ceramic Aluminum Oxide -Engineered for fast metal removal with reduced dressing frequency. -Excels at grinding 50 Rockwell C and harder. -Submicron crystal structure continually fractures to produce sharp new grinding points. -Designed for heavier downfeeds and faster traverse rates with excellent form holding capabilities. Surface Grinding Tips There are many applications in surface grinding, from heavy stock removal to a very precise finish and size requirements. Matching the right wheel with the application is very important to achieve the needs of the grinder. There are many ways to meet these needs. If a fine finish is required a finer wheel may be used. Many times an operator may use one wheel to do the job of many changing the speed and feed of the wheel. Grit Size / Grain Size Combinations Grit Size: All abrasives are sized to a national standard and are assigned a numerical designation. The higher the number, the finer the grit size. When selecting grit size, the following should be considered: Use Coarse Grit: • For rapid stock removal Use Fine Grit: • For form holding • For large areas of contact • For small areas of contact • When finish is not important • For fine finishes • For softer materials • For hard, brittle materials