Arbor Hole
Flap Discs
Versatile grinding and finishing tools, consisting of three main components: a backing plate, adhesive and abrasive cloth flaps. The rectangular flaps are overlapped and glued to the backing plate. Flap discs are designed for right angle grinder applications ranging from heavy stock removal to surface blending.
 TYPE 27 - FLAT |
 TYPE 29 - CONICAL |
| • Used primarily on flat surfaces | • Angled flaps - may be used on both contoured and edge work. |
| • Best choice for blending and smooth finishing | • Angled flaps provide greater surface contact for stock removeal on flat surfaces. |
| • Best choice when speed and stock removal are primary considerations. |
Abrasives - CoatedFlap Discs
Viewing Page 1 of 2
(19 results)
4-1/2X7/8 60 GRIT ENCORE FLAP DISC 10/PK
Item #:
UNI71208
Brand: UNITED ABRASIVES INC
ENCORE TYPE 27
General purpose specification – however, contains larger and more flaps than the competition providing longer life
Premium zirconium grain on cotton backing which provides long life and high stock removal
Will not contaminate stainless steel
Resists loading on aluminum
5X7/8 60 ZIRC T29 XL FLAP DISC 10/BX NLA
Item #:
CGW31144
Brand: CGW-CAMEL GRINDING WHEELS
5 X 7/8 60 GRIT ZIRCONIA WITH GRINDING AID TY29 FLAP DISC
Quickest stainless steel material removal rate on the market a 56% advantage over competitor's grains. Plus good carbon based steel material removal for versatile working.Premium blend of Zirconia and Aluminum Oxide grains with a heat treated polyester backing and active grinding aid. Polyester backing is tough and has minimal stretch. Additional layer containing a resin grinding aid and active grinding agents lubricates the grains for break down with light pressure. Pigment added to to grain to maintain blue coloring.Contaminate-free. For working on flat grinding surfaces. Most efficient when used between 0 to 15 degrees angle. The best choice for smooth finishing.
