Mold Cleaners from Slide Products

Item #: SL46910
Mold Cleaner Plus Degreaser 4 - Aerosol Slide(R) Mold Cleaner Plus Degreaser 4 contains no chlorinated solvents and provides a convenient method for removal of silicones, grease, oil and wax build-up on mold surfaces, etc. without the need for wiping. Ideal for cold molds, it leaves no residue so it cleans without wiping. It has a fast evaporating formulation, is non-conductive and non-abrasive. • No chlorinated solvents • NSF category P1 • Evaporates fast • Leaves no residue

Item #: SL46370
Mold & Metal Wipes Fast, convenient, pre-saturated sheets quickly clean almost any surface.* Use for preparing molds for production or storage; touch-up cleaning during production; surface prep prior to secondary operations; and general maintenance and all-purpose cleaning. *Pre-test on non-metal surfaces. • No chlorinated solvents • Pre-saturated cleaning towels • Quickly removes releases, grease, oil and more • Replaces hazardous cleaning solutions

Item #: SL41914
Resin Remover Mold Cleaner "The Stripper" Resin Remover’s powerful solvents remove resin build-up without needing to remove the mold, minimizing downtime and maximizing production. Resin Remover will remove, strip and/or aid in the removal of many resinous plastics. • No chlorinated solvents • "The Stripper" • Use to unclog mold vents • Removes resin build-up from polyacetals, PVC, urethanes and flame-retardant mold deposits • Removes most color deposits

Item #: SL46410
NEXGEN Mold Cleaner - Aerosol NEXGEN is the most extraordinary cleaning product available. Formulated purely from citrus & vegetable products, it is so much more than other “natural” cleaners. Use it for oil spill clean-up and remediation, dewaxing, removing mold release and degreasing. • No chlorinated solvents • NSF category P1 • Complies with 21 CFR citation (GRAS)**** • Leaves no oily residue • Meets tough health, safety, environmental regulations • High solvency for resins, polymers and dies (****) FDA regulation 21 CFR section 182.20; 21 CFR section 182.60; 21 CFR section 172.515

Item #: SL40910H
Quick Mold Cleaner Effectively cleans molds at room temperature without wiping. It removes silicones, grease, oil and wax build-up on mold surfaces, etc. It leaves no residue. Its fast-evaporating formulation helps maximize the productivity of your operation. • No chlorinated solvents • Cleans quickly without wiping • Recommended for use on molds at room temperature

Item #: SL46515
Citra Cling mold and metal cleaner Citra Cling is an excellent cleaning agent that clings to even vertical surfaces. Superior clinging action allows for maximum cleaning. Water-based cleaner is safe to use on painted surfaces and plastic parts (pre-testing recommended). • No chlorinated solvents • No petroleum distillates or glycol ethers • Clings to surfaces for maximum performance • Water-based high density foam • Removes mold releases, dirt, oil and greases

Item #: SL45612
Econo-Spray® mold cleaner - Aerosol Econo-Spray® mold cleaner quickly removes silicones, grease, oil and wax build-up on mold surfaces. It is also good for clean-up of non-operating electrical equipment and degreasing on machinery. Safe on solvent-sensitive plastics. • No chlorinated solvents • Food-approved solvents(++++) • Food approved • Very low odor

Item #: SL47410
X-EMPT AEROSOL

Item #: SL44212
On/Cycle Mold Cleaner The ideal mold cleaner for use while in production. It works on warm molds up to 150°F and easily removes releases, oils, greases and many resinous build-ups before they can become a problem. Made from citrus oils, it destroys odors, leaving a pleasant orange scent. • No chlorinated solvents • NSF category P1 • Use on warm molds at the press • Complies with 21 CFR citation (GRAS)**** • A multi-purpose mold cleaner • Will not stain aluminum • No caustic or acidic compounds

Item #: SL47212
IPA ISOPROPYL ALCOHOL MOLD CLEANER AEROS