Search in Category
Mold Release Agents
Search term required.
Filter Your Search
Categories
Loading...
Mold Release Agents
Viewing Page 1 of 6
(53 results)
PAINTABLE MOLD RELEASE AEROSOL
Item #:
SL40012N
Brand: SLIDE PRODUCTS INC
Paintable light-duty biodegradable mold release agent - Aerosol
Economical Paintable mold release requires no special cleaning. It will not interfere with part bonding, heat sealing, laminating, ultrasonic welding or post-decorating operations. You get perfect finishes every time and more cycles per can over other comparable releases.
• No chlorinated solvents
• Light-duty
• Get a perfect finish
• Paint, plate and hot-stamp over it
• No spalling & no fish-eyes
• Recognized by UL
• Maximum operating temperature: 650ºF
ECONO-MIST RELEASE AEROSOL 16FL
Item #:
SL41612N
Brand: SLIDE PRODUCTS INC
EconoMIST silicone mold release agent - Aerosol
Contains the same high-quality ingredients as premium Silicone Release except formulated to be used for light-duty applications. For hard to release parts use No. 40112N Silicone Release.
• No chlorinated solvents
• NSF category M1
• Light duty silicone release
• UL recognized
• Maximum operating temperature: 600°F
KNOCK OUT MOLD RELEASE AEROSOL
Item #:
SL46612N
Brand: SLIDE PRODUCTS INC
Knock Out non-silicone, paintable mold release - Aerosol
Knock Out is the mold release that works where others have failed. It gets “sticky parts” cleanly out of the mold and is approved for indirect food contact. Knock Out mold release imparts a light, dry coating that is amazingly effective, working for several cycles without re-application.
• No chlorinated solvents
• Paintable, non-silicone
• Food-approved release agent(*****)
• Maximum operating temperature: 450°F
(*****) FDA regulation 21 CFR 178.3570 (GRAS)
ECONO-SPRAY 2 MR AEROSOL
Item #:
SL40710
Brand: SLIDE PRODUCTS INC
Econo-Spray 2 Mold Release Agent - Aerosol
Econo-Spray® 2 is a paintable release in a non-chlorinated solvent carrier system. It permits post-decorating of molded parts without prior cleaning.
• No chlorinated solvents
• Paintable
• Maximum operating temperature: 650ºF
HEAVY DUTY 10% MOLD RELEASE AEROSOL
Item #:
SL54912
Brand: SLIDE PRODUCTS INC
Heavy-Duty Mold Release and Pin Lube - Aerosol
An ideal lubricant for the front half of ejector pins (pins in forward position), this almost dry lubricant minimizes the possibility of leaching out onto molded parts. Use in combination with application of Super Grease on back side of ejector pins. Stable at temperatures up to 450°F. Heavy-Duty Mold Release and Pin Lube can be used on plastics, rubber, waxes, glass-filled nylon and similar materials.
• No chlorinated solvents
• Non-silicone
• Paintable
• Food-approved lubricant(*****)
• Dry release minimizes leaching out onto parts
• Maximum Operating Temperature: 450°F
(****) FDA regulation 21 CFR section 182.20; 21 CFR section 182.60; 21 CFR section 172.515
ZINC STEARATE MOLD RELEASE AEROSOL 16OZ
Item #:
SL41012N
Brand: SLIDE PRODUCTS INC
Zinc Stearate Mold Release Agent - Aerosol
A dry, light, water-repellent powder, Zinc Stearate is economical to use and gives better finishes. Use it for polycarbonates, polypropylenes, polysulfones and rubber molding. Compatible with oil-based paints, its formulation results in fewer rejects and lower production costs.
• No chlorinated solvents
• Non-silicone paintable
• Lubricant powder
• Maximum operating temperature: 600°F
ECONO-SPRAY 1 SILICONE 5% MR AEROSOL
Item #:
SL40510
Brand: SLIDE PRODUCTS INC
Econo-Spray 1 Mold Release Agent - Aerosol
Econo-Spray® 1 contains a highly effective, non-paintable silicone fluid in a non-chlorinated solvent carrier system. It will give an excellent release with all thermoplastics.
• No chlorinated solvents
• Non-paintable silicone
• Recognized by UL
• Maximum operating temperature: 600ºF